IT技术互动交流平台

华为VRRP热路由备份的应用

来源:linux家园  发布日期:2012-12-01 09:43:57
要求:实验VRRP热路由备份
 
 

Sw1交换机的配置
[sw1]stp enable
[sw1-vlan10]int et0/1
[sw1-Ethernet0/1]port link-type trunk
[sw1-Ethernet0/1]port trunk permit vlan all
 Please wait........................................... Done.
[sw1-Ethernet0/1]int et0/2
[sw1-Ethernet0/2]port link-type trunk
[sw1-Ethernet0/2]port trunk permit vlan all
 Please wait........................................... Done.
[sw1-Ethernet0/2]speed 10
 
[sw1-Ethernet0/2]vlan 10
[sw1-vlan10]vlan 20
[sw1-vlan20]vlan 30
[sw1-vlan30]vlan 40
[sw1]int e0/17
[sw1-Ethernet0/17]port link-type trunk
[sw1-Ethernet0/17]port trunk permit vlan all
[sw1-Ethernet0/17]speed 100
[sw1-Ethernet0/17]duplex full
[sw1-Ethernet0/17]int e0/18
[sw1-Ethernet0/18]port link-type trunk
[sw1-Ethernet0/18]port trunk permit vlan all
[sw1-Ethernet0/18]speed 100
[sw1-Ethernet0/18]duplex full
[sw1]link-aggregation e0/17 to e0/18 both
 
[sw1]int vlan-int 10
[sw1]int vla lan-interface10]ip add 192.168.10.1 255.255.255.0
[sw1-Vlan-interface10]int vlan-int 20                
[sw1-Vlan-interface20]ip add 192.168.20.1 255.255.255.0
[sw1-Vlan-interface20]int vlan-int 30                
[sw1-Vlan-interface30]ip add 192.168.30.1 255.255.255.0
[sw1-Vlan-interface20]int vlan-int 40
[sw1-Vlan-interface40]ip add 192.168.40.1 255.255.255.0
[sw1]stp root primary
配置热路由vrrp
[sw1]inter Vlan-interface 10
[sw1-Vlan-interface10]vrrp vrid 10 virtual-ip 192.168.10.254
[sw1-Vlan-interface10]vrrp vrid 10 priority 120
 
[sw1]int Vlan-interface 20
 [sw1-Vlan-interface20]vrrp vrid 20 virtual-ip 192.168.20.254
[sw1-Vlan-interface20]vrrp vrid 20 priority 120
 
[sw1]int Vlan-interface 30  
 [sw1-Vlan-interface30]vrrp vrid 30 virtual-ip 192.168.30.254
 [sw1-Vlan-interface30]quit
 [sw1]int Vlan-interface 40
 [sw1-Vlan-interface40]vrrp vrid 40 virtual-ip 192.168.40.254
      
Sw2配置
[sw2]stp enable
[sw2-vlan10]int et0/1
[sw2-Ethernet0/1]port link-type trunk
[sw2-Ethernet0/1]port trunk permit vlan all
 Please wait........................................... Done.
[sw2-Ethernet0/1]int et0/2
[sw2-Ethernet0/2]port link-type trunk
[sw2-Ethernet0/2]port trunk permit vlan all
 Please wait........................................... Done.
[sw2-Ethernet0/2]speed 10
 
[sw2-Ethernet0/2]vlan 10
[sw2-vlan10]vlan 20
[sw2-vlan20]vlan 30
[sw2-vlan30]vlan 40
[sw2]int e0/17
[sw2-Ethernet0/17]port link-type trunk
[sw2-Ethernet0/17]port trunk permit vlan all
[sw2-Ethernet0/17]speed 100
[sw2-Ethernet0/17]duplex full
[sw2-Ethernet0/17]int e0/18
[sw2-Ethernet0/18]port link-type trunk
[sw2-Ethernet0/18]port trunk permit vlan all
[sw2-Ethernet0/18]speed 100
[sw2-Ethernet0/18]duplex full
[sw2]link-aggregation e0/17 to e0/18 both
 
[sw2]int vlan-int 10
[sw2]int vla lan-interface10]ip add 192.168.10.1 255.255.255.0
[sw2-Vlan-interface10]int vlan-int 20                
[sw2-Vlan-interface20]ip add 192.168.20.1 255.255.255.0
[sw2-Vlan-interface20]int vlan-int 30                
[sw2-Vlan-interface30]ip add 192.168.30.1 255.255.255.0
[sw2-Vlan-interface20]int vlan-int 40
[sw2-Vlan-interface40]ip add 192.168.40.1 255.255.255.0
 
热路由vrrp的配置
[sw2]inter Vlan-interface 10
[sw2-Vlan-interface10]vrrp vrid 10 virtual-ip 192.168.10.254
[sw2]int Vlan-interface 20
 [sw2-Vlan-interface20]vrrp vrid 20 virtual-ip 192.168.20.254
[sw2]int Vlan-interface 30  
 [sw2-Vlan-interface30]vrrp vrid 30 virtual-ip 192.168.30.254
[sw2-Vlan-interface30]vrrp vrid 30 priority 120
[sw2-Vlan-interface30]quit
 [sw2]int Vlan-interface 40  
[sw2-Vlan-interface40]vrrp vrid 40 virtual-ip 192.168.40.254
 [sw2-Vlan-interface40]vrrp vrid 40 priority 120
 
在sw1上查看VRRP配置
 

在sw2上查看VRRP配置 www.it165.net

Sw3配置
 
[sw3]stp enable
[sw3]stp mode rstp
 
[sw3]inter e0/1
[sw3-Ethernet0/1]port link-type trunk
[sw3-Ethernet0/1]port trunk permit vlan all
 
[sw3]inter e0/2
[sw3-Ethernet0/2]port link-type trunk 
[sw3-Ethernet0/2]port trunk permit vlan all
 
Sw4交换机的配置
[sw4]stp enable
[sw4]stp mode rstp
 
[sw4]inter e0/1
[sw4-Ethernet0/1]port link-type trunk
[sw4-Ethernet0/1]port trunk permit vlan all
 
[sw4]inter e0/2
[sw4-Ethernet0/2]port link-type trunk 
[sw4-Ethernet0/2]port trunk permit vlan all
 
用vlan20的主机ping vlan30的主机
 

路由追踪查看
 

用vlan30的主机ping vlan20的主机并查看追踪路由
 

拔掉sw1与sw3的链路,用vlan20的主机ping vlan30的主机

 

 

革命尚未胜利,同志仍需努力!

延伸阅读:

Tag标签: VRRP热路由备份  
  • 专题推荐

About IT165 - 广告服务 - 隐私声明 - 版权申明 - 免责条款 - 网站地图 - 网友投稿 - 联系方式
本站内容来自于互联网,仅供用于网络技术学习,学习中请遵循相关法律法规